Operating weight: 23698 kg |Net power: 262 Hp |
Loaders
| Engine | ||
| Make | Caterpillar | |
| Model | C13 ACERT | |
| Net Power | 287 hp | 214 kw |
| Gross Power | 311 hp | 232 kw |
| Power Measured @ | 1800 rpm | |
| Displacement | 762.8 cu in | 12.5 L |
| Torque Measured @ | 1400 rpm | |
| Max Torque | 983 lb ft | 1332 Nm |
| Operational | ||
| Operating Weight | 55451 lb | 25148 kg |
| Fuel Capacity | 100.4 gal | 380 L |
| Hydrauilc System Fluid Capacity | 29 gal | 110 L |
| Engine Oil Fluid Capacity | 9.3 gal | 35 L |
| Cooling System Fluid Capacity | 10.3 gal | 39 L |
| Transmission Fluid Capacity | 9.3 gal | 35 L |
| Front Axle/Diff Fluid Capacity | 16.9 gal | 64 L |
| Rear Axle/Diff Fluid Capacity | 16.9 gal | 64 L |
| Static Tipping Weight | 42043 lb | 19067 kg |
| Turning Radius | 24 ft in | 7469 mm |
| Operating Voltage | 24 V | |
| Alternator Supplied Amperage | 80 amps | |
| Rear Axle Oscillation | 26 degrees | |
| Tire Size | 26.5-25 | |
| Transmission | ||
| Type | Powershift | |
| Number of Forward Gears | 4 | |
| Number of Reverse Gears | 4 | |
| Max Speed – Forward | 22.9 mph | 36.9 km/h |
| Max Speed – Reverse | 24 mph | 38.8 km/h |
| Hydraulic System | ||
| Pump Type | Piston | |
| Relief Valve Pressure | 1000 psi | 6900 kPa |
| Pump Flow Capacity | 80.6 gal/min | 305 L/min |
| Raise Time | 5.9 sec | |
| Dump Time | 2.1 sec | |
| Lower Time | 2.4 sec | |
| Bucket | ||
| Breakout Force | 51750 lb | 230 kN |
| Dump Clearance at Max Raise | 10.7 ft in | 3252 mm |
| Bucket Width | 10.6 ft in | 3220 mm |
| Bucket Capacity – heaped | 6 yd3 | 4.6 m3 |
| Bucket Capacity – struck | 5.2 yd3 | 4 m3 |
| Dimensions | ||
| Length with Bucket on Ground | 30 ft in | 9144 mm |
| Width Over Tires | 9.7 ft in | 2956 mm |
| Height to Top of Cab | 11.8 ft in | 3606 mm |
| Ground Clearance | 1.6 ft in | 496 mm |
| Wheelbase | 11.3 ft in | 3450 mm |
| Hinge Pin – Max Height | 14.7 ft in | 4466 mm |
| Reach at Max Lift and Dump | 4.3 ft in | 1291 mm |
