Operating weight: 23698 kg |Net power: 262 Hp |
Loaders
| Engine | ||
| Make | Caterpillar | |
| Model | C7 ACERT | |
| Net Power | 197 hp | 147 kw |
| Gross Power | 217 hp | 162 kw |
| Power Measured @ | 1800 rpm | |
| Displacement | 439 cu in | 7.2 L |
| Number of Cylinders | 6 | |
| Max Torque | 669 lb ft | 907 Nm |
| Operational | ||
| Operating Weight | 40435 lb | 18338 kg |
| Fuel Capacity | 83 gal | 314 L |
| Hydrauilc System Fluid Capacity | 29 gal | 110 L |
| Engine Oil Fluid Capacity | 7.9 gal | 30 L |
| Cooling System Fluid Capacity | 11 gal | 42 L |
| Transmission Fluid Capacity | 9 gal | 34 L |
| Front Axle/Diff Fluid Capacity | 9.5 gal | 36 L |
| Rear Axle/Diff Fluid Capacity | 9.5 gal | 36 L |
| Static Tipping Weight | 27483 lb | 12464 kg |
| Turning Radius | 23 ft in | 7016 mm |
| Operating Voltage | 24 V | |
| Alternator Supplied Amperage | 80 amps | |
| Rear Axle Oscillation | 26 degrees | |
| Tire Size | 23.5R25 | |
| Transmission | ||
| Type | Powershift | |
| Number of Forward Gears | 4 | |
| Number of Reverse Gears | 4 | |
| Max Speed – Forward | 23 mph | 37 km/h |
| Max Speed – Reverse | 24.9 mph | 40 km/h |
| Hydraulic System | ||
| Pump Type | Piston | |
| Relief Valve Pressure | 1000 psi | 6900 kPa |
| Pump Flow Capacity | 71 gal/min | 270 L/min |
| Raise Time | 6.2 sec | |
| Dump Time | 1.3 sec | |
| Lower Time | 2.5 sec | |
| Bucket | ||
| Breakout Force | 37125 lb | 165 kN |
| Dump Clearance at Max Raise | 9.6 ft in | 2922 mm |
| Bucket Width | 9.6 ft in | 2927 mm |
| Bucket Capacity – heaped | 4 yd3 | 3.1 m3 |
| Bucket Capacity – struck | 3.5 yd3 | 2.7 m3 |
| Dimensions | ||
| Length with Bucket on Ground | 26.2 ft in | 7988 mm |
| Width Over Tires | 9.2 ft in | 2784 mm |
| Height to Top of Cab | 11.3 ft in | 3452 mm |
| Ground Clearance | 1.4 ft in | 412 mm |
| Wheelbase | 11 ft in | 3350 mm |
| Hinge Pin – Max Height | 13.1 ft in | 3992 mm |
| Reach at Max Lift and Dump | 3.9 ft in | 1202 mm |
